Ducati Owners Club of Victoria Australia

Tools

Tools are borrowed by arrangement with the Club's Spares and Tools officer who can be contacted .

Model Index
A -	750 GT / Sport / Green frame 750 SS (Round case)
B -	860 GT / GTS / 750 SS / 900 SS / Darmah (Early)
C -	900 SS / SD / Darmah (Bosch Ignition)
D -	350 / 500 / 500 Sport parallel twins
E -	MHR Mille
F -	500 / 600 Pantah
G -	851 Tri-colour
H -	750 Sport (Belt drive)
J -	851
K -	900 SS (Belt drive)

Box 1
No	Tool No	Description	Model Suitability
1	D067503210	Oil filter wrench	G
1	D887005749	Crankcase assembling pin (camshaft)	G
2	D887130101	Clutch locking wrench	ABCE
1	D887130102	Valve spring compressor	ABCD
3	D887130104	Chain pinion wrench (Two home made)	ABCE
1	D887130105	Conical gear locking wrench (750 Distributor.)	A
1	D887130107	Sprocket holding wrench 16 tooth	ABCE
1	D887130108	Alternator locking wrench	ABCF
1	D887130109/132	Advance checking pointer	AC
1	D887130110	Flywheel primary gear puller ( 3" / 86 mm diameter primary gear.)	A
1	D887130111	Lower bevel tower extractor ( 41 mm x 1 tpmm )	A

Box 2
No	Tool No	Description	Model Suitability
1	D887130112	Timing disc holder	AB
3	D887130113	Exhaust nut spanner (Two home made)	ABCE
1	D887130114	Electrical pin extractor (molex, in Box 1 tray)	BCEFG
1	D887130115	Chain tension tool (eccentric swing arm)	BD
1	D887130117	Ignition generator rotor puller	B
1	D887130119	Ignition setting pin (In Box 1 tray)	B
3	D887130120/862	Rocker pin extractor (1 in shim kit)(Two home made)	ABCDEFG
2	D887130123	Timing disc holder	DEFG
1	D887130126	Advance checking pointer	D
1	D887130130	Desmo cam lock	BCE
1	D887130131	Ignition pick up assembling tool (own box)	C
1	D887130132/109	Advance checking pointer (In Timing light box)	AC
NA	D887130133	Flywheel gear extractor ( 757 / 110 in lieu?)	CEG
1	D887130134	Closing rocker spring tool (shim kit)	CE
1	D887130136	Clutch drum locking tool	F
2	D887130137	Primary drive locking tool	FG
1	D887130138	Distribution pulley retaining wrench	FG
2	D887130139	Timing pulley nut wrench	F
1	D887130140	Chain sprocket retaining plate fitting tool	F
1	D887130143	Closing rocker spring tool (In shim kit)	F
		NA = No longer available from factory

Box 3
No	Tool No	Description	Model Suitability
1	D887130144	Chain & alternator cover removing tool	G
2	D887130146	Clutch drum lock wrench	G
1	D887130262	Rocker assembling pin (shim kit)	ABCDE
1	D887130263	Camshaft lock wrench	ABC
1	D887130270	Blind bearing extractor (Alt cover)6203	ABCE
NA	No Duke tool	Blind bearing extractor (Lay shaft) 6204	ABCE
2	D887130710	Alternator lock wrench	EG
1	D887130743	Clutch locking ring wrench	E
1	D887130757	Flywheel gear extractor	CEG
1	D887130862/120	Rocker pin extractor	G
1	D887651002	Computer check lamp '851'	G
		NA = No longer available from factory

Box 4
No	Tool No	Description	Model Suitability
1	D887130250	Single magneto flywheel puller.
1	D887130267	Single valve spring compressor.
1	D887130269/70/71	Single timing bearing extractor.

Belt Drive Desmo Tools & Shim Kit. (Own Box).
No	Tool No	Description	Model Suitability
1	D887005644	Cam belt timing pulley lock wrench (2 pieces)	FGHJK
1	D887130833	Valve guide seal driving tool	G
1	D887130844	Closing rocker half ring tool	G
1	D887130847	Cam timing checking tool (Two tools)	G
1	D887130862/120	Rocker pin extractor	G
1	D887650882	Head nut spanner with 1/4" drive	G
1	D887650998	Ignition pick up height tool	G

Bevel Drive Desmo Shim Kit. (Own Box).

	Micrometer.
	Valve lapping stick.
	Valve lapping stick caps. ( 3 of.)
	Valve lapping paste. ( Two grades.)
	Set of feeler gauges.
	Closing shim comparative measuring tool.
	Closing rocker spring tool D887130143.
	Rocker assembly pin tool D887130262.
	Rocker pin puller tool D887130120.
	Selection of opening shims. (126 opening shims as at 16/03/94)
	Selection of closing shims. (80 closing shims as at 16/03/94)
	Replacement Closing shim collets.
	Information folder.

Other Tools.

	Camshaft drive belt remover. (Pantah)
	Countershaft seal Installation tool.
	Head nut tensioning spanner 16 mm.
	Crankcase separating tool. (In Box 1 tray)
	36 mm socket 1/2" drive. (Primary drive gear)
	30 mm socket 1/2" drive. (Clutch hub nut)
	7 mm Hex key. (Front fork triple clamp new 750/900 SS)
	10 mm Hex key. (Front fork tripple clamps) (In Box 1 tray)
	12 mm Hex key. (Front fork filler cap) (In Box 1 tray)
	14 mm Hex key. (Primary drive cover crankshaft access cap.) (In Box 1 tray)
	Circlip pliers internal. (2) (In Box 1 tray)
	Circlip pliers external. (2) (In Box 1 tray)
	'O' ring chain joining link fitting tool.
	Chain breaker.
	Vacuum gauges (2 sets)
	Timing light. (In own box)
	Timing discs (Degree wheels) (2)
	Magnetic Stand and Dial Gauge. (End float checking, Cam timing checking etc.)
	Makita 1/2" Electric Impact Wrench (Rattle Gun for undoing very tight nuts / bolts etc) comes with impact sockets, 19, 22, 24, 30, 32, & 36 mm. Model 6905B Serial 177422E. And 3/8 drive 4, 5, 6, 7, 8 &10mm hex keys complete with adaptor 3/8 by 1/2.
	Swingarm Eye Reamer with long Pilot Shaft and Cone.
	Compression gauge (cylinder pressure test)
	851 Workshop Manual (Factory original)
	Micrometer
	Selection of opening shims. (100+)
	Selection of closing shims, old type. (100)
	Selection of closing shims, new type. ( ?? )